AquaSure Your Premium Hydroponic Water Conditioner
AquaSure is a clean, modular water conditioner built for hydroponic growers who value cleaner chemistry, consistent hydration, and full-spectrum compatibility. It’s not a nutrient—but it helps nutrients work better by improving their suspension, transport, and uptake. Whether you're growing microgreens, leafy greens, herbs, or specialty crops, AquaSure helps your system run smoother, cleaner, and more predictably—no sludge, no guesswork. Built on a proven base, it’s upgraded to support nutrient flow, microbial balance, and long-term system health.
Getting Started
Follow these steps to integrate AquaSure into your system with confidence:
- Start with clean water—tap, RO, or filtered is fine
- Measure AquaSure according to your system size View Dosing Card
- Mix thoroughly until fully dissolved
- Test pH and EC if desired—adjust only if outside target range
- Add nutrients after AquaSure for best suspension and uptake
System Compatibility
AquaSure works seamlessly across a wide range of hydroponic setups. Use the dosing card below to tailor your application:
- Microgreen trays and shallow root systems
- Vertical towers (Gardyn, Tower Garden, LettuceGrow, 3D printed towers)
- Seed sprouting and seedling care
- Kratky and passive reservoirs
- Flood and drain (ebb & flow) systems
- NFT and deep water culture (DWC)
Expected pH & EC Range
| System Type | Typical pH After Mixing | EC Impact (per mL/L) |
|---|---|---|
| Microgreens | ~6.0 | +0.1–0.2 |
| Tower Systems | 5.8–6.1 | +0.2–0.3 |
| Kratky | ~6.0 | +0.1–0.2 |
| Flood & Drain | 5.9–6.2 | +0.2–0.3 |
Why AquaSure?
• Buffers pH into the ideal range for most hydroponic crops
• Improves nutrient availability and transport
• Disrupts biofilms and supports microbial balance
• Enhances oxygenation and water flow
• Designed for clarity, consistency, and compatibility
Troubleshooting Tips
- If pH is below 5.5, reduce AquaSure dosage slightly or add mild pH up
- If water appears cloudy, check for overmixing or incompatible additives
- For best results, mix AquaSure before adding nutrients
- Store in a cool, dry place—keep lid sealed between uses
Dosing Card
Use the chart below to determine how much AquaSure to add based on your water volume. These values are starting points—adjust slightly based on your water source and crop response. For volumes under 1 gallon, doses are listed in milliliters or drops (1 mL ≈ 20 drops).
| Volume | AquaSure Dose | Notes |
|---|---|---|
| 0.5 L | 2–4 drops | Microgreens, seed sprouting, early seedlings |
| 1 L | 4–8 drops | Seedling trays, starter plugs |
| 2 L | 1–2 mL | Small countertop reservoirs |
| 3.8 L (1 gal) | 2–3 mL | Microgreens, Gardyn, Tower Garden |
| 5 gal | 4–6 mL | Kratky bins, DWC buckets |
| 10 gal | 8–12 mL | Vertical towers, flood & drain trays |
| 20 gal | 15–20 mL | Large reservoirs, multi-tray systems |
